Skip to Content
Exit

Class 150 Carbon Steel Flanges for Pipe Stub Ends

This line of MARZOLF™ class 150 carbon steel stub end two piece flanges is designed to fit IPS Pipe Stub Ends and OD Tube Angle Rings. MARZOLF™ class 150 carbon steel stub end split flanges save money and reduce downtime by eliminating the need to cut and reweld piping when installing or replacing Lap Joint flanges behind Stub Ends and Slip-On Angle Face Rings. These rings are available with different corrosion-resistant coatings including Zinc Electro Plate and E-Coat Epoxy.

Showing all 20 results

Item # Size Inside Diameter (I.D.) Outside Diameter (O.D.) Thickness (T) Bolt Circle (B.C.) Number of Holes Holes Diameter (H.D.) Weight Each
361G80-IPS 1/2” 7/8” 3-1/2” 9/16” 2-3/8” 4 5/8” 1.25 lb
360G80-IPS 3/4” 1-1/8” 3-7/8” 9/16” 2-3/4” 4 5/8” 1.5 lb
357G80-IPS 1” 1-3/8” 4-1/4” 9/16” 3-1/8” 4 5/8” 1.75 lb
358G80-3/4-IPS 1-1/4” 1-3/4” 4-5/8” 3/4” 3-1/2” 4 5/8” 3 lb
359G80-3/4-IPS 1-1/2” 2” 5” 3/4” 3-7/8” 4 5/8” 4 lb
268G80-3/4-IPS 2” 2-1/2” 6” 3/4” 4-3/4” 4 3/4” 5 lb
172G80-4/4-IPS 3” 3-5/8” 7-1/2” 1” 6” 4 3/4” 9 lb
182G80-4/4-IPS 2-1/2” 3” 7” 1” 5-1/2” 4 3/4” 8 lb
149G80-4/4-IPS 4” 4-5/8” 9” 1” 7-1/2” 8 3/4” 12 lb
292G80-4/4-IPS 5” 5-11/16” 10” 1” 8-1/2” 8 7/8” 13 lb
126G80-4/4-IPS 6” 6-3/4” 11” 1” 9-1/2” 8 7/8” 15 lb
144G80-9/8-IPS 8” 8-3/4” 13-1/2” 1-1/8” 11-3/4” 8 7/8” 24 lb
150G80-12/8-IPS 10” 10-7/8” 16” 1-1/2” 14-1/4” 12 1” 40 lb
152G80-12/8-IPS 12” 12-7/8” 19” 1-1/2” 17” 12 1” 59 lb
184G80-12/8-IPS 14” 14-3/8” 21” 1-1/2” 18-3/4” 12 1-1/8” 70 lb
175G80-12/8-IPS 16” 16-3/8” 23-1/2” 1-1/2” 21-1/4” 16 1-1/8” 86 lb
176G80-12/8-IPS 18” 18-3/8” 25” 1-1/2” 22-3/4” 16 1-1/4” 87 lb
177G80-15/8-IPS 20” 20-3/8” 27-1/2” 1-7/8” 25” 20 1-1/4” 127 lb
325G80-15/8-IPS 24” 24-3/8” 32” 1-7/8” 29-1/2” 20 1-3/8” 160 lb
326G80-18/8-IPS 30” 30-3/8" 38-3/4” 2-1/4” 36” 28 1-3/8” 259 lb