Skip to Content
Exit

Class 75 Carbon Steel Flanges to Fit IPS Pipe Angle Rings

This line of MARZOLF™ Two-Piece Flanges is designed to fit IPS Pipe Angle Rings. MARZOLF™ Flanges save money and reduce down time by eliminating the need to cut and reweld piping when installing or replacing Lap Joint flanges behind Stub Ends and Slip On Angle Face Rings. These rings are available with different corrosion resistant coatings including Zinc Electro Plate and E-Coat Epoxy.

Showing all 20 results

Item # Legacy Part Number Size Inside Diameter (I.D.) Outside Diameter (O.D.) Thickness (T) Bolt Circle (B.C.) Number of Holes Holes Diameter (H.D.) Weight Each
0050G80-PAFR 361G80-PAFR 1/2″ 1-1/8″ 3-1/2″ 9/16″ 2-3/8″ 4 5/8″ 1.25 lb
0075G80-PAFR 360G80-PAFR 3/4″ 1-3/8″ 3-7/8″ 9/16″ 2-3/4″ 4 5/8″ 1.5 lb
01G80-PAFR 357G80-PAFR 1″ 1-5/8″ 4-1/4″ 9/16″ 3-1/8″ 4 5/8″ 1.75 lb
0125G80-PAFR 358G80-PAFR 1-1/4″ 2″ 4-5/8″ 9/16″ 3-1/2″ 4 5/8″ 2 lb
0150G80-PAFR 359G80-PAFR 1-1/2″ 2-1/4″ 5″ 9/16″ 3-7/8″ 4 5/8″ 2.25 lb
02G80-PAFR 268G80-PAFR 2″ 2-3/4″ 6″ 9/16″ 4-3/4″ 4 3/4″ 3.5 lb
0250G80-PAFR 182G80-PAFR 2-1/2″ 3-1/4″ 7″ 9/16″ 5-1/2″ 4 3/4″ 5 lb
03G80-PAFR 172G80-PAFR 3″ 3-7/8″ 7-1/2″ 9/16″ 6″ 4 3/4″ 6 lb
04G80-PAFR 149G80-PAFR 4″ 4-7/8″ 9″ 9/16″ 7-1/2″ 8 3/4″ 6.75 lb
05G80-PAFR 292G80-PAFR 5″ 6-1/16″ 10″ 9/16″ 8-1/2″ 8 7/8″ 7.5 lb
06G80-PAFR 126G80-PAFR 6″ 7-1/8″ 11″ 9/16″ 9-1/2″ 8 7/8″ 9.25 lb
08G80-PAFR 144G80-PAFR 8″ 9-3/16″ 13-1/2″ 9/16″ 11-3/4″ 8 7/8″ 14 lb
10G80-PAFR 150G80-PAFR 10″ 11-3/8″ 16″ 3/4″ 14-1/4″ 12 1″ 21 lb
12G80-PAFR 152G80-PAFR 12″ 13-1/2″ 19″ 3/4″ 17″ 12 1″ 30 lb
14G80-PAFR 184G80-PAFR 14″ 14-3/4″ 21″ 1-1/8″ 18-3/4″ 12 1-1/8″ 54 lb
16G80-PAFR 175G80-PAFR 16″ 16-3/4″ 23-1/2″ 1-1/8″ 21-1/4″ 16 1-1/8″ 64 lb
18G80-PAFR 176G80-PAFR 18″ 18-3/4″ 25″ 1-1/8″ 22-3/4″ 16 1-1/4″ 76 lb
20G80-PAFR 177G80-PAFR 20″ 20-3/4″ 27-1/2″ 1-1/8″ 25″ 20 1-1/4″ 78 lb
24G80-PAFR 325G80-PAFR 24″ 24-7/8″ 32″ 1-1/2″ 29-1/2″ 20 1-3/8″ 132 lb
30G80-PAFR 326G80-PAFR 30″ 30-7/8″ 38-3/4″ 1-1/2″ 36″ 28 1-3/8″ 179 lb